PDA

View Full Version : C350 Box operater problem


Custom Search


newbie
06-16-2009, 08:38 PM
I have a C350 and i Intsalled the Hard drive kit but i still cant use the box option when i push the button on the control panel nothing happens. Is there a software switch or something i missed. Please let me know. Thanks!

KonicaNet
06-17-2009, 01:31 AM
You have to follow the instructions that came with the hard drive.
tech rep mode-->System Input-->Hard Disk-->Set-->END-->Fin Time

cycle the main power
you'll get an error code because the HD is not formatted yet.

tech rep--> machine adj-->mem-hard disk-->hard disk format-->logical format-->Press START KEY-->END-->fin. Time.
cycle the main power

You MUST cycle the main power at these 2 places or you'll have to do it all over again.

Hope this helps.

B0265
06-17-2009, 08:17 AM
1 Press the [Utility] key.


2 Touch [Admin. Mode].



3 Using the keypad, type in the administrator code. Touch [Enter].


4 Touch [Admin. Set.].



5 Touch [2/4].


6 Touch .

[B]7 Touch the key for the desired setting.



8 Touch [Enter].



9 Touch [Exit] in the next three screens that appear.


The Basic screen appears again.

Custom Search