optik
07-01-2009, 02:13 PM
Exposure Lamp’s failure to turn ON • The output from the CCD Sensor is a predetermined
value or less during CCD Sensor gain adjustment.
No solution in the service manual.Can somebody help me?
I replaced the exposure lamp with one from another machine and is not working. The lamp from this machine works on another c350.
Any ideas?
Thanks.
value or less during CCD Sensor gain adjustment.
No solution in the service manual.Can somebody help me?
I replaced the exposure lamp with one from another machine and is not working. The lamp from this machine works on another c350.
Any ideas?
Thanks.