View Full Version : Konica 7022 code F4611
Rick Martinez
09-01-2009, 06:15 PM
I need to figure out what this code means the only thing I got is that is an AGC error could anyone help.
Rick
Do you get the code during warmup? Check that the white reference strip on the underside of the platen glass is clean and positioned properly.
It could be a bad exposure lamp. Go into 47 mode, output 00 and the lamp should come on if it's good.
If it happens intermittantly during copy runs it could be the A/D ribbon cable, scanner motor or DC power supply.
strider5555
09-01-2009, 11:13 PM
In my experience, it is the inverter board for the lamp, inv1. Replace that and you should be good.
Rick Martinez
09-02-2009, 12:24 AM
Thanks SAR and Strider for your support, i got it working by cleaning the white reference strip under the glass it.
Rick
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.