PDA

View Full Version : Di183 doc feeder nightmare


Custom Search


OBXtech
11-18-2009, 07:14 PM
I've replaced all feed and seprollers and pads as well as all one way bearings and gears. This doc feeder still insists on what can only be called "continuous feeding." If you stack multiple pages in the ADF, they get pulled through one-at-a-time, but the machine never takes a break in between pages...it just continually feeds them through. This, of course results in a jam because the machine doesn't have 8½" x ∞ loaded in the paper tray. Anybody have any suggestions? :confused:

jimmyj
11-19-2009, 09:09 AM
Have you checked and cleaned all the sensors in the feeder?

albasoul06
11-19-2009, 02:26 PM
Upgrade to the latest version EPROM to correct this problem. The version should be 1177-50G1-07-00 or higher.

Custom Search