zarcorp
02-08-2010, 03:28 PM
RSI AutoLoad Table - Model # 501254 - Roll Systems
The purpose of the AutoLoad™ Table is to extend the output table of the
folder / separator and to reorient the horizontal output to a vertical
position. The table then deposits the vertical stack onto a stack rack for
presentation to an inserter. The operation is performed without stopping
the printer or the folder / separator. The unloaded stacks can be in A-Z or
Z-A format depending on the positioning of the AutoLoad™ Table.
$9,500 or Best Offer
4 Available
Used, Good working order
Buyer pays for shipping - item located in New Richmond, WI
Contact Tom @ ZAR Corporation
Phone # is 612-823-4003 or 800-474-7316
E-mail: tzar@zarcorp.com
The purpose of the AutoLoad™ Table is to extend the output table of the
folder / separator and to reorient the horizontal output to a vertical
position. The table then deposits the vertical stack onto a stack rack for
presentation to an inserter. The operation is performed without stopping
the printer or the folder / separator. The unloaded stacks can be in A-Z or
Z-A format depending on the positioning of the AutoLoad™ Table.
$9,500 or Best Offer
4 Available
Used, Good working order
Buyer pays for shipping - item located in New Richmond, WI
Contact Tom @ ZAR Corporation
Phone # is 612-823-4003 or 800-474-7316
E-mail: tzar@zarcorp.com