tcypy1961
03-29-2010, 11:09 PM
Customer was having document feeder problems with listed copier, and when I went out there and used my original it pulled the original through but didn't eject all the way out of the document feeder. It still produced a copy but it was blank. I sprayed out the switches and sensors with canned air and the document feeder started working, however after I left the copier came up with SC700 and SC701 error codes. I cleaned the connections on the circuit board of the feeder but now it does not recognize that there is an original in the feeder. Has anyone had a problem as such? If so and even if not any help would be appreciated, thank you.