View Full Version : 2535 skewed image wont go away
ValSupply
03-31-2010, 03:27 PM
Can't get the skew to go away on this machine. is registration buckle adjustment the culprit or side to side adjustment the better option. :confused: any help is greatly appreciated!!! Thank You!!
Eric1968
03-31-2010, 04:29 PM
If you're having skew when printing it could also be a bad registration clutch. To correct skew you can adjust registration buckle.
teebee1234
03-31-2010, 11:26 PM
Can't get the skew to go away on this machine. is registration buckle adjustment the culprit or side to side adjustment the better option. :confused: any help is greatly appreciated!!! Thank You!!
Is it skewing on both copies and prints? If only on copies then your scanner needs to be leveled.
ValSupply
04-01-2010, 11:24 PM
rite on the scanner and ardf both had to be adjusted. Thank you!!!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.