Asmotron
04-05-2010, 08:53 PM
Hey all,
Are the drums for the G133/C811DN/CLP240D drum units like any other machine, say a B230/C2500/C2525? I'm trying to diagnose a dot issue on a machine remotely and I'm wondering if I can get to the charge rollers easily to try to clean them up? The spacing seems about right for a charge roller so that was the first thing that came to mind and I don't have one handy to look at before I drive the hour+ up to the account.
The suspect drum only has about 200 clicks on it so I'd like to try to fix it instead trying to get the customer to buy a whole new set of color drums.
Are the drums for the G133/C811DN/CLP240D drum units like any other machine, say a B230/C2500/C2525? I'm trying to diagnose a dot issue on a machine remotely and I'm wondering if I can get to the charge rollers easily to try to clean them up? The spacing seems about right for a charge roller so that was the first thing that came to mind and I don't have one handy to look at before I drive the hour+ up to the account.
The suspect drum only has about 200 clicks on it so I'd like to try to fix it instead trying to get the customer to buy a whole new set of color drums.