View Full Version : Konica 7155 SC 29-01 code
bilyahn
04-19-2010, 03:35 PM
:confused: We are Sharp dealers but have a very good client who was given a Konica 7155 that has a SC 29-01. Can anyone tell me the meaning of that code? Thanks
jeroen2005
04-19-2010, 05:27 PM
:confused: We are Sharp dealers but have a very good client who was given a Konica 7155 that has a SC 29-01. Can anyone tell me the meaning of that code? Thanks
F29-01 Dirt correction failure of the Dmax sensor
during maximum density adjustment.
If this error is detected 10
successive times, the error code is displayed.
TSCB (toner control
sensor board)
PRCB (printer control
Clean the sensor that is seated under the Developer unit and is between the drum seperator claws.
Hope this will help you out.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.