PDA

View Full Version : Minolta di 200 copier says "close section properly"


Custom Search


nanc512
05-05-2010, 05:47 PM
We have an old Minolta di 200 copier. We don't make many copies and it has been great until today. We moved it, it's on a metal cabinet. Nothing happened during the move. I turned it on today and got the "close section properly" for R2. I haven't had that before, I get that message frequently about the part on the top where you do the auto document feed. I opened R1, have to do that to get to R2. Then I opened R2 and shut both of them. I have done this many times, shut the machine off and on and it's still showing the message.

I have no clue what to do and was hoping to get some ideas.

Thank you!

Nan

fixthecopier
05-05-2010, 09:38 PM
Does it have an inset sorter, people leave that door open all the time.

joesf
05-05-2010, 10:48 PM
there is a magnetic switch on the feeder, it probably bumped out of adjustment in the move. Re-align the feeder and you should be good as gold.

Custom Search