rthonpm
05-19-2010, 11:23 PM
Hello all,
I was laid off last week so now I have no need of any of my non-stock 'just in case parts'.
I have available for sale:
2 Ricoh MP 4000 drums
2 MP 4000 hot and press rollers
1 3245c CMY developer motor
as well as a few other odds and ends I will post a full list later. These are all brand new, and all but the B2C motor are in the sealed original box.
PM me for details
rthonpm
06-07-2010, 02:58 PM
At last, here is the complete list of parts I have available for sale:
1 Fax speaker B7125050 used but working off an old AF 3025
1 Web motor for a 2075, AX040136A, used but working
1 Fuser cleaning roller for AF 3245c, AE042080, still in box
1 bottom tray plate, spring and feed roller for MP C2030 series, D0392585, D0392815, AF031084 used from a tray that had its handle and bottom end fence destroyed by a customer. About 1500 pages on the feed roller.
1 G0201961, polygon motor for an AF200, still in box.
1 B0824123 Fuser bottom plate for an AF2035-3035, still wrapped
2 D0099510 drums, new
2 AE010099 hot rollers, AE020199 press rollers and D0094177 thermistors, all new from old PM kits
2 D0146978 filtres for MPC 7500, new
1 D0292751 feed assembly for MP 4000/5000. damaged around the paper end sensor flag, but all other parts in good order, also has a new pickup roller on it as well.
1 B1801120 CMY developer motor for AF3245c, still wrapped
1 D0296010, image transfer assembly for MP C4000-5000, used pulled from a machine that was damaged in a shipping accident (scanner, op panel and fuser were trashed by a forktruck.
PM me if interested in any of these, I'm not looking to make a fortune, just to pay some bills while looking for a new gig.
Lescort
03-27-2011, 01:03 AM
do you have that part number yet? G0201961, polygon motor for an AF200, still in box.
blackcat4866
03-27-2011, 03:33 AM
Sorry for your misfortune.
Keep an eye on the employment forum here. I'm sure your skills will be in demand. =^..^=
rthonpm
03-28-2011, 02:50 PM
Yes, I still have the AF 200 polygon motor. It's in storage right now as I'm moving back home to the Maryland/Pennsylvania area. All the parts listed in the original message are still available.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.