PDA

View Full Version : Dead Machine C 252 How to check mfp


Custom Search


seltan
07-05-2010, 02:17 PM
Sir,
Actually my problem that machine was working fine for A4(print&copy) and small size while after A3 print/copy machine got Hang-up for this problem i have updated NV ram firmware and MFP firmware even after also the problem was persist so my superior asked to send the board to their office and i got feedback from him that PWB(M)and NV RAM working fine with good machine but MFP board not turning On so replace it.earlier the same board was working fine at customer place For A4 now customer firing me ,so i think my superior he dont know how to check the MFP board thats why i asking support from you,can you help me sir?Till now I am keeping the boards in my custody ,same time after my superior check up i am not check up anywhere.

JustManuals
07-05-2010, 10:59 PM
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals (http://www.justmanuals.com)


Paul@justmanuals.com

Stirton.M
07-06-2010, 03:12 AM
Pay no attention to the spamming jerk. He knows not his place and hasn't a clue that you likely already have the manuals.

I answered you in your original post.

FYI, stay in the one post that you originally made for this problem. Making multiple posts like this will not help you get the right help you need and will only add to confusion if someone else is looking for a solution to the same problem.

JustManuals
07-06-2010, 04:50 AM
Pay no attention to the spamming jerk. He knows not his place and hasn't a clue that you likely already have the manuals.

I answered you in your original post.

FYI, stay in the one post that you originally made for this problem. Making multiple posts like this will not help you get the right help you need and will only add to confusion if someone else is looking for a solution to the same problem.

Fuck You! I am a PAID supporter of this forum and as such I can post my links. You don't like it Tough shit!

bronco31
07-06-2010, 06:02 AM
shame on you Paul...

Custom Search