PDA

View Full Version : KonicaMinolta Bizhub 160 and alike, IU recognition.


Custom Search


Hansoon
07-18-2010, 06:26 PM
KonicaMinolta Bizhub 160 and alike, IU recognition.

Often these machines do not recognize the IU (T/C) because of the flimsy terminal contacts in the machine.

Here's a mod to get rid of this problem forever.

Remove all contacts and than solder a 1kΩ resistor to bridge both of the outer terminals as shown in the picture.

http://img80.imageshack.us/img80/5526/connectorterminalmodifi.jpg (http://img80.imageshack.us/img80/5526/connectorterminalmodifi.jpg)



Hans

Custom Search