PDA

View Full Version : Bizhub BW 350, softswitch 418 questions...


Custom Search


Hansoon
07-29-2010, 07:20 PM
Bizhub BW 350, softswitch 418 questions.

I recall a post here somebody mentioning that if softswitch 418 bit 3 and 4 are set to 0 the status message and stop operation for the IU are disabled.

In the manual is written that bit3 must be set to 0 to not display the lifetime message so that seems OK.
However the manual states that bit4 must be set to 1 to NOT stop operation when IU life ends.

What's correct to have lifetime message AND stop operation function disabled?

Hans

KEVIN900
07-29-2010, 08:43 PM
set "3" to "0". Or even easier, when you choose sohtswitch 418, factory has the next number as "58". Change the 58 to "50".

copytechman
07-30-2010, 01:25 AM
Concur with this, done many, machine runs indefinitely with no msg until cq goes south!

Regards!
A.

Custom Search