PDA

View Full Version : Error Code Konica 7155 sservice code 77-01


Custom Search


rocky_biskit
10-08-2010, 08:26 PM
Hey all!
Ive got a k 7155 with an intermittent SC 77 01.
It codes more than not ... Any one know possible causes, and where I should begin looking? Also is there a maintenance reset for the code? It seems pwr off and on does reset it, but it ultimately will return after 2 or three copies.

Thanks all in advance.

Cleveland Tech
10-08-2010, 08:31 PM
FS210, SC77-01 at power up.
Solution
CAUSE: The bin shift motor has failed.
SOLUTION: Check the bin shift motor (p/n 12QR-3610) for binding and/or replace it.

Custom Search