rschmitt
11-03-2010, 03:52 PM
I have a 7103 error -Magenta T/C sensor toner density detection error.
• A normal toner density signal is not
entered in the A/D port of CPU (U2)
on the engine controller.
The manual suggests replacing the engine control PWB first, then the magenta developer, then reseat the connectors. Anyone out there that can point me in the right direction?
Thanks
• A normal toner density signal is not
entered in the A/D port of CPU (U2)
on the engine controller.
The manual suggests replacing the engine control PWB first, then the magenta developer, then reseat the connectors. Anyone out there that can point me in the right direction?
Thanks