PDA

View Full Version : blank screen on bizhub c451 after replacing mfp board


Custom Search


paperjam
11-19-2010, 12:06 PM
After replacing the MFP board on a Develop ineo +451/Konica Minolta bizhub c451, I keep getting a blank op's panel. I have replaced with two different MFP boards and same issue. Can anyone help me with this????

mrwho
11-19-2010, 12:15 PM
Maybe the new board needs to be flashed with the firmware?

paperjam
11-19-2010, 12:23 PM
Thanks for quick response but tried updating firmware but cant get it done with flash card as screen is blank

dallas
12-01-2010, 07:09 PM
If you have forgot to connect the JMB-Board to the new MFP-PWB, you get a blank screen.

7352

TheOwl
12-02-2010, 03:44 AM
Also check the old board for CF cards. Can't remember if this model used them or not but same as the pic above, if you forget to transfer them to the new board then you can't upgrade the firmware.

RRodgers
12-02-2010, 03:45 AM
Maybe the new board needs to be flashed with the firmware?

What he said. They do not come with firmware.

Custom Search