PDA

View Full Version : C350 black screen


Custom Search


alsi5
02-16-2011, 12:39 PM
Hello, I have machine with black screen on LCD, it shows after firmware upgrade ;/ Did anyone help me fix it? I heard that there in nothing to do more (just change MFP main board) but i think maybe NVRAM reload can fix it? Did anyone knows how to change NVRAM files?

mrwho
02-16-2011, 05:02 PM
Stupid question: Did anyone check the contrast dial on the operation panel?

alsi5
02-16-2011, 06:16 PM
it's not about contrast :P
machine have black screen and touch panel not responding on touch (also start lights orange - not green)

mrwho
02-16-2011, 06:23 PM
Sorry, but sometimes the most simple solutions elude us.

Did you try to flash it again? If it didn't work, then I'm afraid you'll indeed need to start swapping boards.

alsi5
02-16-2011, 08:09 PM
Yes, i tried upgrade and downgrade firmware and this takes no effect ;/

mrwho
02-16-2011, 11:10 PM
But it accepts the firmware when you try to upgrade and downgrade it?

alsi5
02-17-2011, 06:47 PM
unfortunetly no ;/ there is no response when i put card into machine

mrwho
02-17-2011, 06:58 PM
Then there's nothing else to do than to start swapping boards - seems like your colleague was right.

alsi5
02-17-2011, 07:41 PM
Maybe somebody have to sell one?

bigdcopy
02-18-2011, 03:02 AM
I have experienced this on several different Konica color machines. Does the machine cycle when you turn it on? It will more than likely be the MFB board (this is the board that the update card plugs into). I have tried NVRAM recovery but when the screen is dead it does not work.

Custom Search