PDA

View Full Version : Konica 7130 pm procedure


Custom Search


SKTeK315
02-16-2011, 08:14 PM
How do I record "L" adj into NVram ?

mrwho
02-16-2011, 10:19 PM
You must enter 36 mode, High Voltage Adjustment and execute the L detection adjustment.

SKTeK315
02-17-2011, 12:35 AM
Yeah I did & it said result ok. I turned it off & on. Made a self generated print out & it jammed. I Clnd rollers & path. Gave me 1 complete copy. I made a copy this time. Then F-26-3 started. The only way I was able to clear that code was not to turn off & back on but to redo the whole counter resetting proceedure. Then runing "L" again. Now it codes out every time u turn it on.
Most important. How to record the ATS reading into NVram ??

mrwho
02-17-2011, 07:52 AM
The result is recorded into NVRAM every time you do the L-Detection. You either got a toner sensor problem or a toner feed problem.

Custom Search