View Full Version : Di1610fp, lost adminstrator password, reset
rdyjnkns
02-21-2011, 06:59 PM
Good morning. My customer has a KM Di1610fp and has lost the admin password to the web interface. According to the User Manual for Internet Fax and Network Scan Kit SU-6, the default password is "sysadmin". We tried this along with "0000" and "00000000", but no joy. If I perform SERVICE MODE, CLEAR DATA, and MEMORY CLEAR, will this reset the unit and the admin password back to default?
manuelcorrea
02-22-2011, 12:51 AM
password should be "sysadm"
rdyjnkns
02-22-2011, 05:46 PM
password should be "sysadm"
Thanks manuelcorrea, I tried "sysadmin", it did not work. Is there a way to reset the unit back to factory defaults?
manuelcorrea
02-22-2011, 06:37 PM
should be 'sysadm' not 'sysadmin'
rdyjnkns
02-28-2011, 05:43 AM
Thanks manuelcorrea. That was it. However due to other electical problems, the little MFP is being replaced.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.