burncrauder
03-30-2011, 02:16 AM
Hello there folks,
I tried everything to fix this error. When I turn on the machine almost imediatly i get SC34-01. At the service manual it says: "TH1 (fixing temperature /1) detects more than 220°C for five consecutive times in 1 second cycle. ".:confused:
I've changed the TH1 themistor, the Print Control Board, DCPS (DC power supply), TH2 thermistor, and the L3 and L2 fixing lamps. :mad:
I've changed the hole internal unit (ADU and everithing), and putted in to another machine and get's the same error.
Does any one has a clue?
Thanks
BC
I tried everything to fix this error. When I turn on the machine almost imediatly i get SC34-01. At the service manual it says: "TH1 (fixing temperature /1) detects more than 220°C for five consecutive times in 1 second cycle. ".:confused:
I've changed the TH1 themistor, the Print Control Board, DCPS (DC power supply), TH2 thermistor, and the L3 and L2 fixing lamps. :mad:
I've changed the hole internal unit (ADU and everithing), and putted in to another machine and get's the same error.
Does any one has a clue?
Thanks
BC