View Full Version : Miscellaneous Reset account passcode entry
I have a customer whom purchased a Sharp ar-m277 from an out of business sale. When it is powered on, it is asking for a five digit account number that no one knows.
Is there a backdoor I can use or can I reset it to factory defaults?
Akitu
04-08-2011, 02:41 PM
Sim 22-7 will show you the current key operator code (5 digit number), change it at will after you get it.
bdcrandall13
04-08-2011, 02:44 PM
Try 00000, that is the default administrator code. There is a way to reset the default code as well in simulation mode.
Akitu
04-08-2011, 02:45 PM
Typically 24-30 is the admin password reset code, but I don't believe that was on any of the ARM machines.
jobert
04-08-2011, 03:06 PM
Sim 22-7 would be better, why try anything else? besides the machine only asks for acct pass.
going to give the sim 22-7 a shot when i get to the customers site. to get into sim is P* C* correct?
Lawrence
04-08-2011, 03:50 PM
going to give the sim 22-7 a shot when i get to the customers site. to get into sim is P* C* correct?
Correct
sim 22-7 worked great. thank to all for the help.
John
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.