PDA

View Full Version : Sharp MX-550N Finisher ?


Custom Search


scomeau1
04-13-2011, 10:12 PM
Sharp MX-550N 550-N Copier G3 Fax Print Scan w/Finisher | eBay (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&_trksid=p4340.l2557&rt=nc&nma=true&item=250803478623&si=JaYnkU0Pr5QPWwvxoTBd3iTX3FA%253D&viewitem=&sspagename=ADME%3AB%3AEOIBSA%3AUS%3A1123)

In this photo the gap between the finisher and the main unit has a larger gap at the
bottom could this be a problem ?

Also I need to install the hole punch kit ARPN4B 3-hole Punch Unit,

Has anyone installed this punch unit?

Thanks Scott

divad2k1
04-13-2011, 11:25 PM
First of all, in the picture its a MXM550 not a MX.

The gap between the finisher and the copier can be a problem if left like this but its a easy fix...you only have to adjust the height of the finisher.

Punch unit installation is really easy and take a few minutes.

scomeau1
04-13-2011, 11:40 PM
Why is he listing it as an "You are bidding on a Sharp MX-550N Copier" then ?

What is the difference between the two models ?

Thanks Scott

blackcat4866
04-14-2011, 12:00 AM
It's a mistake in terminology. I had to lecture our dispatchers that "550" is not enough. There is an AR-M550U, AR-M550N, FO-DC550, MX-M550U, MX-M550N, ... you get the idea. It's just sloppy description.

Custom Search