Copier Systems
08-01-2007, 04:13 AM
Have call service uo-80 and L8-01 know what code is but what is the fix?
Can fix uo-80 by removing connectors on sub board machine will go into ready.got L8-01 after removing dv units* all connectors were put back whare they were removed from. on u0-80 code-connectors that were removed an pushed back in after ck-ing pins whare connector go.
Help
Andy H.:confused:
Can fix uo-80 by removing connectors on sub board machine will go into ready.got L8-01 after removing dv units* all connectors were put back whare they were removed from. on u0-80 code-connectors that were removed an pushed back in after ck-ing pins whare connector go.
Help
Andy H.:confused: