RShea
06-09-2011, 11:23 PM
Newer client (to me) with a older Bizhub 250 (B&W only). They have employee changes and have the scan buttons programmed for individual type and users home ISP Email addresses. The unit definitely has a static IP address on it. However the admin web connection page does not load at all. Tried both http: and https: just to be safe followed by the static address (that has been verified as correct)
Want to re-program the scanner email info and destinations- they use and ISP email address, nothing internal and as each employee changes they have to update this. I could struggle through with the keypad on the copier but would take much longer that way than it did for my C252 in my office via the computer and the web interface.
Can this pagescope web page not be present, or disabled on some models. All others I have encountered this could be reached locally from a PC.
Want to re-program the scanner email info and destinations- they use and ISP email address, nothing internal and as each employee changes they have to update this. I could struggle through with the keypad on the copier but would take much longer that way than it did for my C252 in my office via the computer and the web interface.
Can this pagescope web page not be present, or disabled on some models. All others I have encountered this could be reached locally from a PC.