PDA

View Full Version : Key counter turnned on disables the Mode Memory option C253.


Custom Search


oldschool
06-28-2011, 08:05 PM
There are three common vending modes; Key counter, Vendor1 and Vendor 2. The customer is using the key counter. When ever the key counter or vendor 1 are enabled the Mode Memory button is disabled. It's OK if Vendor 2 is enabled. Konica Minolta has done this with other features it feels do not work well in a vend environment like duplex. In the case of a disabled duplex there were secret software switches that Konica Minolta told us to change and duplexing worked again with a key counter. I've been through the manual and nothing jumped out at me. Does anyone know of a software switch to re-enable the "Mode Memory" button when in key counter mode.

Thanks

oldschool
07-01-2011, 10:06 PM
Just gonna bump this once and then let it go gentle into that good night.

Custom Search