pieter laubscher
07-21-2011, 05:54 AM
Hi Everyone, I have the following problem: P21 and double imaging on a C250. I have tried the following:1.) Changedand tested all image units
2.) Changedand tested transfer belt (As per service manual)
3.) CleanedIDC sensors
4.) SE1and SE2 sensors cleaned
5.) CleanedImage unit pins
6.) Strippedand cleaned HV1 board (As per Service manual)
7.) Upgradedfirmware to G0055
9.) Cleanedtransfer roller
Black and white prints are fine, problem only on colour.
Any Help please if anyone has had this problem before?
2.) Changedand tested transfer belt (As per service manual)
3.) CleanedIDC sensors
4.) SE1and SE2 sensors cleaned
5.) CleanedImage unit pins
6.) Strippedand cleaned HV1 board (As per Service manual)
7.) Upgradedfirmware to G0055
9.) Cleanedtransfer roller
Black and white prints are fine, problem only on colour.
Any Help please if anyone has had this problem before?