PDA

View Full Version : Miscellaneous Faults and blemishes on bizhub C6500


Custom Search


maccenterpc
11-01-2011, 11:58 AM
Print SRA3 170 gm total area of ​​printing with tint 20% felt landscape, marks appear strong and clear like other failures. In sequence.

If you roll the paper, the diameter of the brand is the same as the 2nd transfer roller.

It's been done ajsutes transfer, pressure trasferência, pre-transfer, cleaning the contacts of high voltage, replacement drums and developers.

After an exchange of kits 100k and 200k, defect persists.

I have 06 C6500 with the same problem.

If you can help me.

Thanks in advance.

richd
11-01-2011, 09:13 PM
Possible to attach samples ?

empiru
11-04-2011, 06:24 PM
Sorry, I can't understand if you replaced both Transfer Roller and 2nd Transfer Roller. If you did, you might want to check the 2 bearings from the 2nd Transfer Roller. If that roller isn't " rolling" free, strange faults can appear on the image.

sbillis
11-05-2011, 02:43 PM
I believe is the common issue with that machine but you can make it less visible with some special settings at 2nd transfer.

First we must see a sample.

Do you mean "... the diameter of the brand..." the band?

Custom Search