PDA

View Full Version : CWS 4 on ic-408 pop up error..


Custom Search


inutelkamo
11-03-2011, 08:48 AM
Hey guys, just want to share this and ask some suggestions.

Lately i've been servicing ineo +6500 with ic408 and CWS4, upon logging as administrator at CWS4, probably after 5 mins, this error pops up,

" The CWS 4 must closed. If same error occurs, reboot the server. Restart CWS 4?"

Then it ask yes or no, if you click one of those, the CWS will close and you cant open it again, unless compurer is restarted.

But, if you just disregard it, you can still print..

Any suggestion on what to do?
Planning to DL cws 5 and format the fiery.

P.S. : this problem occur in all computers.

Custom Search