rlr42173
11-10-2011, 05:40 PM
Hello I have a Di850 that has gray background.
I have new developer, wires, decent drum, have run all peculiarity settings, Voltages in 36 mode are in line. This happens on Prints or Copies from glass.
See picture for example.
It is definitely worse on the 2nd side of copies, but all the same it is there on both sides. I just don't know what to try next. Tired of wasting time on this problem. The TCSB is actually pretty clean when I inspect it after running a lot of copies. What could be causing this?
Any help is welcomed and appreciated.
Thank You
I have new developer, wires, decent drum, have run all peculiarity settings, Voltages in 36 mode are in line. This happens on Prints or Copies from glass.
See picture for example.
It is definitely worse on the 2nd side of copies, but all the same it is there on both sides. I just don't know what to try next. Tired of wasting time on this problem. The TCSB is actually pretty clean when I inspect it after running a lot of copies. What could be causing this?
Any help is welcomed and appreciated.
Thank You