PDA

View Full Version : Miscellaneous Bizhub Pro C6500 printable area


Custom Search


empiru
11-15-2011, 09:01 PM
Ok... so, we have a machine that works with Fiery IC 303 and a few days ago we had the chance to test it with a Creo IC 304... one of the differences was the printable area on 13x19 inch paper - the IC 304 could print an image 3-4 mm larger than the IC 303. So, my question is - does somebody know if you can change the printable area somewhere in the Fiery? If it matters, it uses Command Workstation 5. I looked for this setting everywhere (I guess) on this controller but couldn't find anything.

Thanks in advance!

Custom Search