PDA

View Full Version : Toshiba e-studio 2540C C580 Error Code


Custom Search


pcernicky
12-08-2011, 01:29 AM
Hi All,
Just installed new finisher MJ-1031 to 2540C and I'm getting C580 error code.
I replaced the ICB board (small board) and also new finisher. Still the same error code.

Please help.

Thank you.

Pete

Meach
12-08-2011, 01:41 AM
Check that 08/4548 is set to 0. I believe these new units default at 1

pcernicky
12-08-2011, 01:49 AM
All Set guys.

08 start, 4548->0 OK Shut Off.

Custom Search