View Full Version : Xerox Workcentre XD100 E7-03 error
rrtomes
05-12-2005, 06:51 PM
Does Any one know what this error is and a solution to correct it? error E7-03
Post edited by: rrtomes, at: 2005/05/12 10:52
Post edited by: rrtomes, at: 2005/05/12 20:28
according to partsdrop.com, it is a laser output error. the site says to make sure right door is closed correctly and try turning off then on to see if code clears. thats all it says. bad laser?
good luck,
ray
jimbob
07-13-2005, 11:45 PM
i know this is late but it is the laser
spiky
09-22-2005, 12:29 PM
this must be very late but you can try a simple solution. Clean the ads strip at the leading edge of the exposure glass
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.