View Full Version : Miscellaneous background color only in copies
copyfax20
12-31-2011, 04:51 AM
when i print a image is background ok, but when i make a copy the image is with color background in all area
JR2ALTA
12-31-2011, 05:35 AM
what machine? adf and glass?
run all "initial setup" procedures that come with machine.
JustManuals
12-31-2011, 08:08 AM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
blackcat4866
12-31-2011, 11:33 AM
what machine? adf and glass?
run all "initial setup" procedures that come with machine.
Ditto. =^..^=
copyfax20
01-02-2012, 03:39 PM
My equipment is Konica Minolta Bizhub C500, when i make a copy backgroun shadow and image copies is present in all document. I have poor quality of image.
I try follow steps
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [3. Image quality adjustment] key.
3. "Image quality mode menu screen"
Press the [2. Printer gamma adjustment] key.
4. "Printer gamma adjustment menu screen"
Press the [2. Printer gamma sensor adj.] key.
show me...
Error 31: Sensor value abnormality - Re-adjust it
blackcat4866
01-02-2012, 03:50 PM
What color is the background? How many prints on each developing unit?
=^..^=
copyfax20
01-02-2012, 05:55 PM
The background is not color specific, i make copies in single mode (C Y M Bk) and copies are within background shadow, but with full color background is present.
Only in mode copier is a problem, when i send a print with fiery a print with full color is ok
mrwho
01-02-2012, 07:10 PM
Did someone mess with the "Background Adjust" button on the image adjust screen? That would only affect copies and not prints.
Also, clean your optics.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.