Darren King
03-13-2012, 02:47 PM
I am working on a KonMin C220 that is skewing when copying from the glass and DF but not when printing. I know on some of the older machines you could just kinda give it a chiropractic adjustment by lifting on the left corner of the scanner bed, but, this one seems pretty tight. I was wondering if anyone knows if there is a mechanical adjustment for this. It is skewing from both trays and the bypass in landscape and portrait so I am pretty sure it isn't a tray problem. I stopped the paper at the reg roller and it is straight there. Any help is appreciated.
Thanks
Darren
Thanks
Darren