View Full Version : Trying to resetdrum counter after installation on Imagistics IM2520(ZF25)
axyun
03-30-2012, 12:00 AM
I referred to Konica Minolta DI2510 service manual and attempted reset but was blocked at one point. I pressed Utility, Meter Count, then stop 00 stop 01. Then instead of options to choose there was a blue box in which to enter number. I tried serial number and pressed enter but nothing. Any help is appreciated. Frank/ActionPhotocopy
scottybbb
03-30-2012, 12:47 AM
Try eight zeros.
axyun
04-01-2012, 01:25 PM
Thank you very much Scotty. Frank
axyun
04-06-2012, 08:10 AM
Entered the 8 zeros as suggested and was able to reset. Also had to leave right side door open during reset for it to take. Frank
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.