KMnyafayce
06-11-2012, 11:51 PM
Hey Ya'll,
Got this issue that has just been ripping (literlly) my call backs up. Jamming out of tray three. replaced pickup/feed/sep rollers, conveyance rollers, black feed frame and actuator for a J1301 jam code. It started out as a jam if it was doing three or more pages it would just time out. I did all the recommended updates based on what i could find on Konica Minolta's SSD knowledge base. When I replaced the feed unit black base frame, a different type of jam started occuring. Now what it's doing is kinda rolling the paper between sep roller and metal frame ramp before the sep roller. Not doing it but every 50 sheets or so. Another technician also replaced the motor that provides drive the lower tray's feeding and conveyance.
Could there possibly be anything causing this to occur based on something not put back together right from the motor/assembly being replaced?
Has anyone seen this before?
Thanks.
Got this issue that has just been ripping (literlly) my call backs up. Jamming out of tray three. replaced pickup/feed/sep rollers, conveyance rollers, black feed frame and actuator for a J1301 jam code. It started out as a jam if it was doing three or more pages it would just time out. I did all the recommended updates based on what i could find on Konica Minolta's SSD knowledge base. When I replaced the feed unit black base frame, a different type of jam started occuring. Now what it's doing is kinda rolling the paper between sep roller and metal frame ramp before the sep roller. Not doing it but every 50 sheets or so. Another technician also replaced the motor that provides drive the lower tray's feeding and conveyance.
Could there possibly be anything causing this to occur based on something not put back together right from the motor/assembly being replaced?
Has anyone seen this before?
Thanks.