View Full Version : [Repair]DC controller ir5065
makmee
10-13-2012, 02:55 PM
Hi all,
I have DC controller ir5065
I need Repair
I need Circuit Diagram
Send to pm or post
Thanks in advance
zoraldinho
10-13-2012, 04:03 PM
17673
Herrmann
10-14-2012, 08:19 PM
Just a Hint: There are several fuses soldered on this bord, mostly of yellow or orange color, check them first and if defect, replace. I have repaired several Controllers this way, saving large amount of $ ;)
makmee
10-20-2012, 05:18 PM
17673
Thank you very much
makmee
10-20-2012, 05:19 PM
Just a Hint: There are several fuses soldered on this bord, mostly of yellow or orange color, check them first and if defect, replace. I have repaired several Controllers this way, saving large amount of $ ;)
Thank you For ideas
Simons
10-21-2012, 01:01 AM
do you have the toner problem e025 or something? Blown fuse.
mehta
06-28-2020, 04:39 PM
Thank you very much.
mehta
06-28-2020, 04:44 PM
do you have the toner problem e025 or something? Blown fuse.
Due to faulty toner motor fuse blown in DC controller PCB
Replace motor and fuse in dc.
Phil B.
06-28-2020, 05:35 PM
Due to faulty toner motor fuse blown in DC controller PCB
Replace motor and fuse in dc.
this thread is 8 years old...
dead thread.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.