pontiac
10-20-2012, 09:55 PM
This is our first customer who wants to connect to a wireless DSL system. Is the setup the same as hooking it up to a standard wireless network or our there settings that need to be changed. The copier has a H1 fiery. Thanks
You'll need a wireless bridge to convert wireless to wired.
You can buy them locally, it will cost you less than $50, any (almost) anybody can install and configure it in 30 minutes or less.
I had an office manager at a retirement home go out and buy one, then install it herself in an afternoon.
Piece of cake!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.