View Full Version : iR4570 dirty copy when doing duplex
brianho80
10-23-2012, 03:22 PM
Hi expert,
does anyone face this problem before? i had replace a drum but dirty copy always occur at the edge of paper when doing duplex.
please refer to my attachment with 2-sided copying.
teckat
10-23-2012, 06:06 PM
Hi expert,
does anyone face this problem before? i had replace a drum but dirty copy always occur at the edge of paper when doing duplex.
please refer to my attachment with 2-sided copying.
Lead Edge Background Through the Feeder
adjust the Document Feeder Height.
Feeder Height Adjustment can be found on page 4-15 of the DADF-N1 Service Manual.
Rachid.Akli
10-23-2012, 06:46 PM
Hi expert,
does anyone face this problem before? i had replace a drum but dirty copy always occur at the edge of paper when doing duplex.
please refer to my attachment with 2-sided copying.
Hi Brianho,
I am a little bit confused with your thread.
-I suppose that you don't have the same copy quality with the recto.
-Is the issue the same when copying with DADF and on the glass?
-What is the size of your original document?
Rachid.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.