Hansoon
10-28-2012, 06:49 PM
BH-162, deviation CD direction.
Machine has a large 10 mm deviation in the CD direction. Copies from the glass can be "corrected" more or less by adjusting the main scanning direction as described in the manual. Copies wit the ADF show also the 10mm error and strangely enough cannot be corrected using the adjustment of the ADF main scanning direction. There is no difference regardless which value I enter.
Even worse, also the machine generated test pattern and prints are 10mm off in the CD direction.
Did I overlook something? Any idea's before investing in a new Laser Printhead?
Hans
Machine has a large 10 mm deviation in the CD direction. Copies from the glass can be "corrected" more or less by adjusting the main scanning direction as described in the manual. Copies wit the ADF show also the 10mm error and strangely enough cannot be corrected using the adjustment of the ADF main scanning direction. There is no difference regardless which value I enter.
Even worse, also the machine generated test pattern and prints are 10mm off in the CD direction.
Did I overlook something? Any idea's before investing in a new Laser Printhead?
Hans