View Full Version : Error code 548 in ricoh 3001 colur
muthana
11-08-2012, 06:36 AM
i have problem code error with ricoh colur 3001 the code error is (548) please helpe me quiqly
regards
barratec
11-08-2012, 08:05 AM
HI,
the SC code is about the fusing unit. Check it!
To reset the code enter in the service mode and turn OFF then ON the machine. If the error code persists there's something wrong in the fusing unit(lamps, thermistor...).
muthana
11-08-2012, 08:50 AM
thank u for your help
i tried to reset the code by turn on and off the mashine but the code is still
i will check thirmostor and lamp as u saide
muthana
11-08-2012, 09:18 AM
i apreciated i u support me how i replce or clean and check (lamp and thirmostat) by photo
Polo-022
11-08-2012, 10:13 AM
18095
collme
11-08-2012, 06:31 PM
i apreciated i u support me how i replce or clean and check (lamp and thirmostat) by photo
Oh dear, end users request info on how to take machines apart. A disaster in the making i feel :eek:
JustManuals
11-08-2012, 06:50 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
SargeNZ
11-08-2012, 10:51 PM
5-810 will reset fusing SC if just entering service mode doesn't do the trick, you will need to exit SP and then reset machine with * and # keys.
Of course, none of us take any responsibility for fires.
Bantams
11-09-2012, 01:04 PM
One of the lamps as blown its going to need a Real Tech to replace it these machines had a bad batch of fuser lamps when they were released.
Taking it apart yourself is just gonna cost you a lot more money.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.