View Full Version : Error Code MPC2550 SC553, SC551, SC563 and SC565
23889
11-14-2012, 08:18 PM
I have 20 machines that with no rythm or reason gives one of the codes above. I have tried Fuser parts and even different fusers to try and resolve this problem. Each machine may run a month or just a few days then a code reoccurs.
Has anyone else had this problem with this machine?
SargeNZ
11-14-2012, 08:34 PM
I have just scrolled through those codes in the manual, if you have already tried new fusers then the common denominator in 3 of them is the PSU so maybe start there?
Edit: Just read the question properly, I have not seen this myself, especially not over something like 20 machines.
Eric1968
11-14-2012, 08:45 PM
Firmware up to the latest?
23889
11-14-2012, 08:56 PM
Firmware has been updated to the latest. Have not tried a powersupply yet. I would have tried if the codes had not been so random.
JustManuals
11-14-2012, 09:24 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
Sweden_GBG
11-15-2012, 07:25 AM
I´ve got the SC 553 on MPC 2500 the fuser was pretty new (17%) the costumer had been running a lot of diffrent paper (160gm2, 80gm2 and 250gm2. Change the fuser and told them how to use diffrent paper (thick 1,2 and so on).
anyway I had even have that SC 553 on MPC 2050 (almost the same that mpc 2550), that fuser was pretty nice to (only 8%) change fuser and never heard about it again. But I have saved the fuser somewhere to wait for a solution for fix sc553 =)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.