View Full Version : konica 1015 copier

Custom Search

01-14-2008, 10:16 PM
This copier will not completely exit the paper. Anyone have any ideas?

Mark B
01-14-2008, 10:57 PM
Time for a new machine

01-15-2008, 03:16 AM
If the m/c previously had a sorter then the conveyor unit may still be installed
If not then there is a gear on the delivery rollers that wears unfortunately you have to strip boards etc from rear of m/c to get at it
But first check that the pressure rollers on top of the delivery rollers have not been dislodged by the customer
They are a simple spring loaded affair that you will see when you open the clamshel

good luck


01-15-2008, 11:54 AM
thats not a machine, thats a reef!

why you still trying to fix 20 year old copiers?

Custom Search