Canon IRC 3580i - Y1 stapling problem

[Gbr]

Hello

I'm having a problem and I'm hoping somebody could help..
I have an irc 3580i with y1 finisher, and when i want to staple copies (not booklet!) it only staples the first sheet, the second one or the third are not correctly alligned back into the stapler..
And when i want to make more than one copies(ex. 5 times to staple 3 sheets), the problem will occur only on the first copy(first 3 sheet).Other copies will be stapled fine.
I heard form someone that it's probably not rollers fault, becouse collate option works fine.


If anybody has experience with this problem, or any suggestion, I would be most grateful.

Best regards

Tim

[teckat]

Hello

I'm having a problem and I'm hoping somebody could help..
I have an irc 3580i with y1 finisher, and when i want to staple copies (not booklet!) it only staples the first sheet, the second one or the third are not correctly alligned back into the stapler..
And when i want to make more than one copies(ex. 5 times to staple 3 sheets), the problem will occur only on the first copy(first 3 sheet).Other copies will be stapled fine.
I heard form someone that it's probably not rollers fault, becouse collate option works fine.


If anybody has experience with this problem, or any suggestion, I would be most grateful.

Best regards

Tim


see below:rolleyes:
http://www.copytechnet.com/forums/canon/72721-finisher-issues-skew-stacking-stapling-various-models.html

[Gbr]

see below:rolleyes:
http://www.copytechnet.com/forums/canon/72721-finisher-issues-skew-stacking-stapling-various-models.html

Thank you.:)
This is exactly what I need. I must have missed it before.