PDA

View Full Version : orientation scan problem


Custom Search


zuper
03-06-2013, 01:04 AM
Hi i am traying sacan múltiple pages from a document, but the orientation of pages 3/4/6/8/... Are wrong. I gues is bad configuration but i cant find the god one.

What can i do?
Thanks.

Synaux
03-06-2013, 07:46 PM
Not sure I can help you without a model number...
But I can't think of a setting that will mess with page orientation only on specific pages--in my experience.

zuper
03-06-2013, 08:37 PM
sorry, the model is bizhub 420

kingarthur
03-07-2013, 12:42 PM
are you scanning landscape or portrait, have you got samples

zuper
03-21-2013, 07:51 PM
Hi! I have more information

the problem is when i scanning from document 2 side and the paper size is 8.5*13in. if is 8.5*11 scan normaly

i attach an example

what I can tray?

thanks

kronical
03-21-2013, 10:34 PM
Hi! I have more information

the problem is when i scanning from document 2 side and the paper size is 8.5*13in. if is 8.5*11 scan normaly

i attach an example

what I can tray?

thanks

8.5x11 feeds long edge first, and comes out fine... 8.5x13 can only be fed short edge. Make sure you specify under Original Settings the correct orientation and binding direction of the original.

zuper
03-22-2013, 04:49 PM
8.5x11 feeds long edge first, and comes out fine... 8.5x13 can only be fed short edge. Make sure you specify under Original Settings the correct orientation and binding direction of the original.


Hi, I am sure i specify the god orientation and direction, but scan wrong :(
feed the short edge (is only way) and i chose the original setting horizontal

zuper
03-23-2013, 07:35 PM
You are right! The binding, was The binding!

Thank you very much!
:)

Custom Search