View Full Version : BH 600 web issue
fixthecopier
03-24-2013, 11:16 PM
I am having problems with a couple of my most used machines, where I have changed the web assemblies. On two of the machines I have changed the actuator solenoid and on both of those machines the web quits moving, destroying the ufr. I can manually move the units and can see the actuator moving with the door pried open. I change the assembly, not just the refill, but they are not OEM. Have any of you had similar web issues?
Flash
03-24-2013, 11:28 PM
Reset the web counter at 250K. For some reason we have found that the web stops advancing when the web count goes past 300K. I know it will go 500K but the replacement interval is actually 250K.
Darren King
03-25-2013, 01:15 AM
I have had the web drive gears become brittle and break.
fixthecopier
03-25-2013, 11:42 AM
Reset the web counter at 250K. For some reason we have found that the web stops advancing when the web count goes past 300K. I know it will go 500K but the replacement interval is actually 250K.
These are failing as new installs. I reset the counters when they are put in. I am starting to suspect the aftermarket webs. They seem to bind when manually checking them.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.