PDA

View Full Version : BizHub 250 locked up


Custom Search


copyman
07-31-2013, 08:16 PM
Machine starts to warm up but freezes with the Kon/Min logo on display. I seem to recall this has to do with the NVRAM? Also heard of a special program / firmware that can reset the NVRAM?
Any ideas appreciated. Thanks

wseyller
07-31-2013, 10:04 PM
There is a special procedure to do something similiar when getting some error codes related to an nvram issue but if it won't go past the logo then an nvram problem would mean replacement of nvram and mfp board.

Hansoon
07-31-2013, 10:25 PM
Try reseating first the MFBS board (under the scanner, the one with the network interface on it). This helped me in many cases.

Hans

JustManuals
08-01-2013, 12:38 AM
I have the Ricoh NVRAM reset program, email me if you want it.

Paul@justmanuals.com

Custom Search