PDA

View Full Version : Ricoh Aficio 3035 Factory Reset


Custom Search


Yagami
08-05-2013, 09:38 AM
I want to clear the data of my printer it is a Ricoh Aficio printer, model 3035. I already tried this method: How to Reset a Ricoh to Factory Settings | eHow (http://www.ehow.com/how_6767608_reset-ricoh-factory-settings.html), but it didnīt work so I suppose for this model we have to do something different. Any suggestions?

Greetings

JustManuals
08-05-2013, 03:33 PM
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)



Paul@justmanuals.com

TonerMunkeh
08-05-2013, 06:09 PM
What settings do you want to reset and why do you want to reset them?

Yagami
08-06-2013, 09:25 AM
What settings do you want to reset and why do you want to reset them?

Thank you for the answer. Iīve already did a factory reset to this printer, now iīm trying to reset a Ricoh Aficio 2022 but still couldnīt do it. I want to clean all the information that is there (address books, contacts, all that info, clean it like it was new) I did a memory clear data (5801) in service mode but apparently there are still contacts there when I click in the scanner button and I want to clear that too.

TonerMunkeh
08-06-2013, 12:55 PM
Format the hard drive then reinitialise the address book, that will clear it.

Yagami
08-06-2013, 03:33 PM
How do I format the hard drive of the printer?

sandmanmac
08-06-2013, 03:36 PM
How do I format the hard drive of the printer?

You contact Paul (above), and RTFM

Eric1968
08-06-2013, 05:35 PM
Thank you for the answer. Iīve already did a factory reset to this printer, now iīm trying to reset a Ricoh Aficio 2022 but still couldnīt do it. I want to clean all the information that is there (address books, contacts, all that info, clean it like it was new) I did a memory clear data (5801) in service mode but apparently there are still contacts there when I click in the scanner button and I want to clear that too.

Another one that thinks that SP5-801-001 will solve everything, well it does not. Maybe it's time for you to read the fu..ing manual!!.

ruben
08-06-2013, 06:06 PM
Why not just remove all that information manually? Or even through the web manager? If you are worried about data security, then remove the HDD and replace with a new one.

Athlontini
08-06-2013, 11:26 PM
How do I format the hard drive of the printer?

You seemed to be able to find out about SP5801 and what it does - it's in that same section of SP modes.

Custom Search