PDA

View Full Version : Konica BH C450 Fax#


Custom Search


blackdog
08-23-2013, 12:23 AM
Customer ask me to change Fax# and Name. Did this through Admin but it won't lock in.
I looked high & low, service mode, service manual, past threads but nada, no go, nuttin. Fax must have it's own manual.
Go back into admin and the info I had inputted is there but not on header of sent faxes, old # remains.
Unit is not connected other than fax.
Thanks for your help.

Shadow
08-23-2013, 01:47 AM
go to admin settings and then to fax.
check your header settings, and I think there is also another setting for the header.

blackdog
08-27-2013, 11:43 PM
go to admin settings and then to fax.
check your header settings, and I think there is also another setting for the header.

Hey thanks I finally was to setup header.
Another question if you are obliged.
Customer wants default Auto-Color to default to Black only. I've gone through service manual to no avail.
Any suggestions on this.

Grey
08-28-2013, 06:14 AM
Select black on the operation panel.

Next press Utility, User Settings, Copier Settings, Default Copier Settings, choose current Setting.

That is your answer.

blackdog
08-28-2013, 08:26 AM
Select black on the operation panel.

Next press Utility, User Settings, Copier Settings, Default Copier Settings, choose current Setting.

That is your answer.

Colorado, Sweet & Thanks

Custom Search